Melbourne company's innovative solution to Australia's housing crisis

  • 📰 9NewsAUS
  • ⏱ Reading Time:
  • 38 sec. here
  • 2 min. at publisher
  • 📊 Quality Score:
  • News: 18%
  • Publisher: 72%

ประเทศไทย ข่าว ข่าว

ประเทศไทย ข่าวล่าสุด,ประเทศไทย หัวข้อข่าว

The company claims the printer could build a 210 square metre single-storey home in just 40 hours. 9News

Fortex Technical Director Jake Hartman said the process is like a 3D desktop printer but on a much larger scale and can construct a home in a more efficient time period.

"It is a modular-based system from small homes to 12 metres wide and three storeys and 50 metres deep before you have to move the printer, so basically infinite in-depth," Lederer said. "The design freedom it will give architects and designers will bring about a whole new way and lifestyle as a result of the different shapes and forms we will be able to see in residential construction," Hartman said.The process is not limited to size and can build homes up to 12 metres.

"That compared to a conventional building eight to 12 weeks for the wall system, that is excluding the delays that all builders are having in terms of supply, now it could blow out to 14 weeks for the wall system," Lederer said.

เราได้สรุปข่าวนี้มาให้อ่านอย่างรวดเร็ว หากสนใจข่าว สามารถอ่านฉบับเต็มได้ที่นี่ อ่านเพิ่มเติม:

 /  🏆 10. in TH
 

ขอบคุณสำหรับความคิดเห็นของคุณ ความคิดเห็นของคุณจะถูกเผยแพร่หลังจากได้รับการตรวจสอบแล้ว

Smaller version of the theory behind medium density high rise. Still equates to the same amount of defects per sq metre.

A group of 15 inexperienced people can build an earthbag home in a day for less than $1000

How's the cost?

Finally an Australian company that’s doing something and not following…now the next trick will be to convince conservative Australians to actually buy it…

A strong gust of wind would knock that entire structure down

It can build the framework for it. Eg the walls. But not everything. Not will it be structural enough to move in. 40 hours to print the walls. How many more untill the clay is dry properly and the rest of the fitting?

As long as the temperature doesn't get over 30⁰C you'll be laughing.

ประเทศไทย ข่าวล่าสุด, ประเทศไทย หัวข้อข่าว

Similar News:คุณยังสามารถอ่านข่าวที่คล้ายกันนี้ซึ่งเรารวบรวมจากแหล่งข่าวอื่น ๆ ได้

NSW given emergency powers to direct coal companies to provide fuel to electricity generatorsIn an extraordinary development in NSW’s energy crisis, Kean met the governor late on Thursday to seek the powers, which gives him authority to force coal and logistics companies to deliver fuel. so, nothings changed then? OK, are you allowed to make this up? I wanna know before I declare that CANT MAKE THIS SHIT UP! What investigation has been undertaken by the SMH to assess whether Liberal Party donor and coal baron Trevor St Baker has been involved in exacerbating the energy crisis since the Liberal Party lost the election?
แหล่ง: smh - 🏆 6. / 80 อ่านเพิ่มเติม »

‘We’re not trying to game the system’: Energy companiesThe Australian Energy Market Operator said there was sufficient supply to meet demand this weekend as energy companies reject claims they have profited from the energy crisis. Sure... Check the John Clarke & Brian Dare bit from 2017 - The Energy Market Even comedians could spot the BS a mile away... There's not sufficient supply in South Aus take a look at 8pm each night Bowen the wrong person to put in charge of the energy portfolio. A tad arrogant and attention seeking. The art of negotiation may not be in his repertoire. Technocrats create an overly complex system, fail to secure long term supply and when it goes pear-shaped, blame producers.
แหล่ง: FinancialReview - 🏆 2. / 90 อ่านเพิ่มเติม »